For specific
3D Coat series
Coating sealant for 3D printed products
Market
-
Powder Shaped material
Purpose
- Seal porosities
- Give pressure resistance
- Dustproof/moistureproof treatment
- Adding water repellency
Features
It can be used to provide pore sealing properties for 3D printed products and as a top coat as it is colorless and transparent.
- It has good permeability and penetrates into fine pores, giving it pressure resistance.
- Since it becomes a transparent film, it does not damage the appearance of the modeled product
- Quick-drying and excellent workability (spray type is also available)
- Blocks outside air and reduces strength loss due to moisture
| Product name | 3D Coat 5920 | 3D Coat 5920S | 3D Coat 5925 |
|---|---|---|---|
| Main component | Polyacrilic acid ester | Polystyrene | |
| Apeearance | Colorless transparent liquid | Light yellow liquid | |
| Active ingredient | 12% | 14% | 10% |
| Viscosity(25℃) | 1 ～ 3 mPa・s | 1 ～ 3 mPa・s | 3 ～ 7 mPa・s |
| Dry time to touch | 3 ～ 5 minute | 6 ～ 11 minute | 3 ～ 5 minute |
| Curing time | 5 hour | 5 hour | 5 hour |
| Application method | Brushing / Dipping | Spray | Brushing / Dipping |
| Pore sealing property | ○ | ○ | × |
| Moisture-proof | ○ | ○ | ◎ |
| water repellency | △ | △ | ◎ |
| Storage method | Avoid direct sunlight, keep container tightly closed and store in a cool and dark place. | ||
| Packing style | 1L can | 300mL spray can | 1L can |
MEGACOAT 6100
Corrosion-resistant coating agent for thermal spray coatings
（(Two-component unsaturated polyester type)
Market
Insulated bearing/Thermal sprayed coating/Ceramic
Purpose
- Protection of base materials from corrosive liquids and gases
- Sealing cracks and pinholes
Features
This is a partial sealant that has been modified from Megaseal, a special Impregnants for thermal spray coatings, to be a room temperature curing type. It is possible to process large parts that cannot be processed with impregnating equipment. Protects the base material from corrosive acids or gases.
- Generates a strong cured product with a cross-linked structure as a no-agent type
- Excellent durability, especially heat resistance, acid resistance, and insulation resistance
- Due to its low viscosity and good wettability, it can be used with parts of various shapes
| Product name | MEGACOAT 6100 Main agent | MEGACOAT 6100 Hardening agent |
|---|---|---|
| Main conponent | Methacrylic acid ester | Organic peroxide |
| Appearance | Light purple liquid | Transparent liquid |
| Active ingredient | 100% | |
| Viscosity(25℃) | 20 mPa・s（Immediately after stirring the base resin and hardener） | |
| Mixing ratio | 100：1（weight ratio） | |
| Pot life | 30 minute（25℃） | |
| Curing time | 24 hour（25℃） | |
| Storage method | Avoid direct sunlight, keep container tightly closed and store in a cool and dark place | |
| Packing style | 1L can | 100 mL plastic bottle |