Super Seal P-600 series
Equipped with high sealing ability and easy cleaning Standard Impregnants for castings
Market
Mobility
Motor
Infrastructure
Pneumatic/
Hydraulic
Precision Electronic Equipment
Powder Shaped material
Military
Purpose
- Sealing
- Adding pressure resistance
- Pre-treatment for surface treatment
Features
- This Impregnants has high sealing ability and is used by the most customers
- Excellent heat resistance/chemical resistance
- Economical with relatively low consumption
- Water soluble and easy to clean, less likely to cause poor appearance
| Main component | Methacrylic acid ester(water soluble) |
|---|---|
| Appearance | Colorless transparent liquid |
| Active ingredient | 100%（Penetration is 100% cured） |
| Density(25℃) | 1.04 ～ 1.07 g/cm3 |
| Viscosity(25℃) | 6 mPa・s |
| Packing style | Main agent：Drum/Lamiclean Can Hardening agent：Poly container/Lamizip |
Related
Super SealP-601
MIL-I-17563C Class 1, 1a, 3 certified product. Standard Impregnants for Super Seal P-600 series.
| Target material | Metal/Resin |
|---|---|
| Pressure resistance | 2.0 MPa or more |
| How to use | Add the entire amount of hardening agent to the base resin and stir thoroughly before use. |
| Storage method | Cool and dark place below 20℃ |
Super Seal P-601E
MIL-I-17563C Class 1, 1a, 3 certified product. This is a non-cyanide type environmentally friendly Impregnants.
| Target material | Metal/Resin |
|---|---|
| Pressure resistance | 2.0 MPa or more |
| How to use | Add the entire amount of hardening agent to the base resin and stir thoroughly before use. |
| Storage method | Cool and dark place below 20℃ |
Super Seal P-601+H
This is a hardening agent mixed type Impregnants that eliminates the need to mix the base agent and hardening agent after delivery.
| Target material | Metal/Resin |
|---|---|
| Pressure resistance | 2.0 MPa or more |
| How to use | Please use the entire amount. (Not compatible with drums) |
| Storage method | Cool and dark place below 20℃ |
Super Seal P-601C
This is an Impregnants for export to China.
| Target material | Metal/Resin |
|---|---|
| Pressure resistance | 2.0 MPa or more |
| How to use | Add the entire amount of hardening agent to the base resin and stir thoroughly before use. |
| Storage method | Cool and dark place below 20℃ |
Super Seal P-601NE
This is an Impregnants that prevents outgassing.
| Target material | Metal/Resin |
|---|---|
| Pressure resistance | 2.0 MPa or more |
| How to use | Add the entire amount of hardening agent to the base resin and stir thoroughly before use. |
| Storage method | Cool and dark place below 20℃ |
*Our lineup of impregnants also includes P-600 series. Please feel free to contact us.