Apply drop
ALTOUCH 1180 series
One-component anaerobic sealant
Market
-
Mobility
-
Motor
-
Infrastructure
-
Pneumatic/
Hydraulic
Purpose
- Seal porosities
- Give pressure resistance
- Seal and tighten the screw joints
Features
ALTOUCH 1180 series is a one-component anaerobic sealant that penetrates quickly by dropping a small amount onto the target area, and completely cures once contact with air is cut off, imparting pressure resistance.
- From micro-porosities to relatively large porosities are covered
- Only selectively penetrated areas will harden. Surfaces exposed to air will not harden
- Excellent chemical resistance
- Can be sealed in a short time by using a curing accelerator (sold separately)
*Curing accelerator Net.40g(brown bottle)
| Product name | ALTOUCH 1180 | ALTOUCH 1180V | ALTOUCH1185 |
|---|---|---|---|
| Main component | Modified acrylic monomer | ||
| Appearance | Green liquid | Yellowish brown liquid | |
| Active ingredient | 100%（Penetration is 100% cured） | ||
| Density(25℃) | 1.08～1.10 g/cm3 | 1.08～1.10 g/cm3 | 1.11～1.13 g/cm3 |
| Viscosity(25℃) | 10～15 mPa・s | 400～600 mPa・s | 30～35 mPa・s |
| Curing time | 12 hour | 12 hour | 6 hour |
| (Using accelerator) | 30 minute | 30 minute | 30 minute |
| Pinhole | small | big | small～medium |
| Storage method | Avoid direct sunlight, keep container tightly closed and store in a cool and dark place. | ||
| Packing style | 50 g resin container (hardening accelerator: brown bottle 40 g) | ||